Zebralight H502D Headlamp

£74.95

Sorry this item is out of stock
Email Me When Back In Stock
Product thumb
Zebralight H502D Headlamp
£74.95
  • Operating Voltage Range: 0.7V - 4.2V
  • Beam Type: Flood
  • 120º Beam Spread
  • Diameter: 0.84" / 21.3 mm
  • Length: 2.76" / 70.1 mm
  • Weight: 1 oz. / 29 g (excluding battery and headband)
  • Battery capacity indicator (LED flashes 1-4 times. 4 short clicks to start)
  • All levels are current regulated
  • Low battery alert when the light is switched OFF and the battery voltage is below 1.06V
  • Durable electronic soft-touch switch
  • Smart user interface 
  • Precision machined unibody casing from premium grade  aluminum bar stock
  • Proprietary heat sinking design bonds the LED board directly to the unibody aluminum casing
  • Durable natural hard anodized finish (Type III Class I)
  • Tempered optical grade glass
  • Battery power can be locked out by slightly unscrewing the tailcap to prevent unwanted activations or parasitic drain
Product thumb
Zebralight H502D Headlamp
£74.95

1 Review

5.0 Overall rating

5
1
4
0
3
0
2
0
1
0

07/02/2017

A really useful mini floodlight - good for lighting up dark rooms or basements on surveys. Using one button to access 12 modes is a bit of a learning curve but worth it. This probably won't be the last zebralight I buy...

Description

The Zebralight H502D headlamp has a maximum output of 190 lumens from the Philips LUZEON T Neutral White LED. The light has a nominal CCT of 5000K, providing a warm white beam tint; the higher the Kelvin (K), the cooler the beam temperature. The light is powered by a single, widely available AA (alkaline, NiMH or lithium) battery.

Zebralight has long been known for producing the best 'pure flood' single AA headlamps available. Building on this heritage, the LED offers improved colour rendition with a wide area beam pattern.

In addition to the three main levels of High, Mid and Low, the H502D features a beacon and strobe mode. Each main level can be programmed to one of its two sub-levels. The second sub-level of each main levels can be further programmed to different brightness levels.

One short click on the head torch turns on the light to High and again to switch it off; two short-click turns on the light to Mid and three short-click turns on the light to the special modes. Press and hold the switch (for over 0.6 seconds) to cycle through Low, then Mid and High, simply releasing at the desired level.

For more advance operation and configuration, press and hold to cycle from Low to Mid to High, and release at the desired level to set. Double click the switch to toggle and select between the two sub-levels for that main level. Sub-level selections for the 3 main levels are memorised after the light is turned off and through battery changes.

The second sub-level (H2, M2 and L2) of each main levels can be further programmed to different brightness levels. At a main level, double-click 6 times to start configuration. On subsequent double-clicks the light will cycle through different brightness levels. When a configuration is finished, short click to turn off the light. The selections for the second sub-levels are memorized after the light is turned off and through battery changes.

Brightness Levels:
High: H1 190 lumens - 0.9 hrs runtime or H2 117 lumens - 1.9 hrs runtime / 73 lumens - 3.3 hrs runtime
Mid: M1 36 lumens - 7.5 hrs runtime or M2 18 lumens - 12 hrs runtime / 9 lumens - 27 hrs runtime
Low: L1 2 lumens - 96 hrs runtime or L2 0.25 lumens - 3 weeks / 0.04 lumens - 2 months runtime / 0.01 lumens - 3 months runtime

Plus Beacon Strobe mode: 4 Hz Strobe at H1 / 19 Hz Strobe at H1

Waterproof to IPX-7.

Includes: pocket clip, headband, spare o-rings, 1 x AA (alkaline) battery.