The Nitecore TINI 2 brings some impressive upgrades from the original version including an OLED display and increased brightness to 500 lumens. Utilising two Osram P8 LEDs and a total reflective optic lens for a uniform beam pattern with a maximum range of 89 meters. Impressive from a torch small enough to fit onto a key ring and weighing just 19 grams!
The TINI 2 is rechargeable with a USB-2 port. Inside a 280mAh Li-ion battery can provide up to 60 hours runtime on the lowest brightness level. *Please note a USB-C cable is not included so will need to be purchased separately if you don't already have one*
The OLED display shows a range of useful information including battery level and voltage, brightness level, user mode and remaining runtime.
Unique features include two different lockout modes, half lockout allows for momentary lighting by holding the mode button and full lockout that deactivates both buttons. These are useful for a light that is likely to spend a lot of time inside pockets. There are also two user modes, demo for short-time illumination and daily mode for regular use. Direct access to turbo and ultra-low modes is also available.
Brightness Levels, Runtime and Range:
Turbo: 500 lumens - 15 minutes - 89 meters
High: 200 lumens - 45 minutes - 56 meters
Mid: 65 lumens - 2 hours 30 minutes - 32 meters
Low: 15 lumens - 8 hours - 14 meters
Ultralow: 1 lumen - 60 hours - 6 meters
ATR (Advanced Temperature Regulation) regulates the output of the TINI 2 according to the working condition and ambient environment to maintain optimal performance and prevents damage to the LEDs from overheating.
Compatible with the Nitecore Flexible USB Charging Stand and the light can be operated whilst charging.
IP54 rated weather proof but not submersible.
Size: 46.6 mm x 25 mm x 12.5 mm / 1.83" x 0.98" x 0.49"
Weight: 18.8 grams / 0.66 oz
Utilises a total reflective optic lens for soft, uniform light
Built in 280mAh li-ion battery
Advanced Power Cut-Off (APC) technology for an ultra low standy power consumption
USB-C charging port
Highly efficient constant current circuit provides a stable output
2 user modes available (Demo and Daily mode)
Dual side switch design
5 brightness levels available with direct access to turbo mode
Intelligent mode memory function
2 lockout modes available
Incorporated Advanced Temperature Regulation (ATR) module
Metal ring pull
HA III hard anodised finish
23/12/2020 - Mr SHIPLEY, HUCKNALL
A big improvement on the first tini. It’s basically a small version of Nitecore’s Tup light. Similar features in a compact small light.The Tup was just a bit too big for a key ring. Good service from Flashaholics.